PV24I 24/12V

Konverter mit Isolierung

Technische Spezifikation:

Input voltage range17-32Vdc Output voltage 13.6Vdc +15% -20% at extremes of temperature, load, input tolerance, etc. Intermittent output power As stated, taken for a maximum of 2 minutes followed by 8 minutes rest. Transient voltage protection Meets ISO7637-2 International standard for 24Vdc commercial vehicles Electrostatic voltage protection Meets ISO10605, ISO14892, >8kV contact, 15kV discharge Output noise <50mV pk-pk (100mV on 24V units) at continuous load. Meets CISPR25 and VDE0879-3 Off load current (quiescent current) <15mA Power conversion efficiency Typically: 90% for non-isolated units, 85% for isolated units Isolation >400Vrms between input, output and case, on isolated products only Mean time between failures >162 years (HRD4) Operating temperature -25ºC to +30ºC to meet this specification table +30ºC to +80ºC de rate linearly to 0A Storage temperature -25ºC to +100ºC Operating humidity 95% max., non-condensing Casework, Anodised aluminium, glass filled polycarbonate, dust water and impact resistance to IP533 Connections Four 6.3mm push-on flat blade connectors Output indicator Red LED adjacent to output terminals Mounting method ‘Click ‘n’ fit mounting clip, fitted separately using three hole fixing Safe area protection: Over current Limited by current sensing circuit Over heat Limited by temperature sensing circuit Transients Protected by filters and rugged component selection Catastrophic failure Protected by internal input and output fuses Approvals 2004/108/EC The general EMC directive 2006/96/EC The automotive directive 93/68/EEC The CE marking directive

Wir verkaufen nur neue und originale Produkte!